ServerNet Cluster Supplement for NonStop NS-Series Servers (H06.08+)
Integrity NonStop NS-series Server Supplement
ServerNet Cluster Supplement for HP Integrity NonStop NS-Series Servers—529933-006
1-4
Software Requirements
°
Integrity NonStop NS14000 systems with an IOAM enclosure require the
H06.05 RVU, which includes all required SPRs.
°
Integrity NonStop NS14000 series systems with VIO enclosures require the
H06.08 RVU, which includes all required SPRs.
•
Depending on your cluster configuration, you might also need to install G-series
software on any NonStop S-series nodes in the ServerNet cluster (see Table 1-1).
•
For RVU and SPR software requirements for Integrity NonStop NS-series systems
to be connected to a BladeCluster, refer to the
BladeCluster Solution Manual
.
Recommended SPR for Multi-Zone Long-Distance Options
For long-distance clusters using either the two or three zone options, HP strongly
recommends T9050H02^AQD or later. (T9050H02^AQD was released at H06.05, so it
is already part of the base software platform for Integrity NonStop NS14000 series
systems.)
For more information about the long-distance options, see the
ServerNet Cluster 6780
Planning and Installation Guide
.
Table 1-1. Minimum Software Requirements for Integrity NonStop NS16000
Series
Software Component H-Series PVU G-Series PVU
Expand/ServerNet
profile
T0509H01 The Product Version Update (PVU)
required is the same as documented in
existing manuals.
ServerNet
Management Driver
For 6780 switches:
T2800H01
The PVU required is the same as
documented in existing manuals.
SNETMON/MSGMON T0294H01 T0294AAP is required on any NonStop
S-series nodes in the cluster.
SANMAN T0502H01 The PVU required is the same as
documented in existing manuals.
T0502AAN and earlier PVUs report
WRONG TYPE for the CRU TYPE if a
6780 switch contains quad MMF PICs in
any of the slots 6 through 9.
OSM Service
Connection Suite
T0682H01^AAE T0682AAA is required on all NonStop
S-series nodes in the cluster if you use a
6780 switch containing quad MMF PICs in
at least one of the slots 6 through 9 to
connect NonStop S-series servers to the
cluster.