ServerNet Cluster Supplement for NonStop NS-Series Servers (H06.08+)

Integrity NonStop NS-series Server Supplement
ServerNet Cluster Supplement for HP Integrity NonStop NS-Series Servers—529933-006
1-15
STATUS CONNECTION Command (6780 Switch)
STATUS CONNECTION Command (6780 Switch)
The STATUS CONNECTION syntax has not changed, except that the NNA option is
not supported for Integrity NonStop NS-series nodes. Example 1-4 on page 1-17
shows the display for a 6780 switch connected to an Integrity NonStop NS-series
node.
•
The Node port heading replaces the MSEB port heading displayed for NonStop
S-series nodes. The Node port heading contains information about the port on the
p-switch (NS16000 series), ServerNet switch board (NS14000 with IOAM), or
Optical Extender PIC (NS14000 series with VIO) that connects to the cluster
switch.
•
Table 1-5 lists the attributes that have different descriptions for Integrity NonStop
NS-series nodes.
Table 1-5. STATUS CONNECTION Attributes for Integrity NonStop NS-Series
Nodes (page 1 of 2)
Attribute Description
Fabric Access The status of the external X and Y fabric connections. The possible values
are the same as documented in the
ServerNet Cluster 6780 Operations
Guide, except for:
•
WRONG CRU TYPE indicates that a PIC other than a dual SMF or
quad MMF PIC is installed in slot 2 of the p-switch. For NS14000
series, only an MMF connection to the IOAM ServerNet switch board
or the VIO Optical Extender PIC is supported. The NonStop S-series
equivalent is CRU TYPE NOT MSEB.
•
CRU MISSING indicates that a p-switch (or p-switch logic board)
(NS16000 series), a ServerNet switch board (NS14000 with IOAM), or
an Optical Extender PIC (NS14000 series with VIO) is missing. The
NonStop S-series equivalent is MSEB MISSING.
•
PIC MISSING indicates that a dual SMF PIC or quad MMF PIC is
missing from slot 2 of the p-switch. The NonStop S-series equivalent is
NO NNA PIC.
•
NO CRU CONFIG RECORD indicates a configuration problem. The
NonStop S-series equivalent is NO MSEB CONFIG RECORD.
•
BAD CRU CONFIG RECORD indicates a configuration problem. The
NonStop S-series equivalent is BAD MSEB CONFIG RECORD.
•
CRU CONFIG FETCH ERR indicates a configuration problem. The
NonStop S-series equivalent is MSEB CONFIG FETCH ERROR.
Port The port number on the ServerNet switch board (NS14000 with IOAM),
Optical Extender PIC (NS14000 series with VIO), or p-switch PIC
(NS16000 series) to which the ServerNet cable is attached.