ServerNet Cluster Supplement for NonStop NS-Series Servers (H06.08+)

Integrity NonStop NS-series Server Supplement
ServerNet Cluster Supplement for HP Integrity NonStop NS-Series Servers—529933-006
1-18
STATUS CONNECTION Command (6770 Switch)
STATUS CONNECTION Command (6770 Switch)
The STATUS CONNECTION syntax has not changed, except that the NNA option is
not supported for Integrity NonStop NS-series nodes. Example 1-5 shows the display
for a 6770 switch connected to an Integrity NonStop NS-series node:
•
The Node port heading contains information about the p-switch port that connects
to the cluster switch. The NonStop S-series equivalent is MSEB port.
•
Table 1-6 lists the attributes that have different descriptions for Integrity NonStop
NS-series nodes.
Table 1-6. STATUS CONNECTION Attributes for Integrity NonStop NS-Series
Nodes
Attribute Description
Fabric Access The status of the external X and Y fabric connections. The possible values
are the same as documented in the
ServerNet Cluster Manual, except for:
•
WRONG CRU TYPE indicates that a PIC other than a dual SMF or quad
MMF PIC is installed in slot 2 of the p-switch. The NonStop S-series
equivalent is CRU TYPE NOT MSEB.
•
CRU MISSING indicates that a p-switch or p-switch logic board is
missing. The NonStop S-series equivalent is MSEB MISSING.
•
PIC MISSING indicates that a dual SMF PIC or quad MMF PIC is missing
from slot 2 of the p-switch. The NonStop S-series equivalent is NO NNA
PIC.
•
NO CRU CONFIG RECORD indicates a configuration problem. The
NonStop S-series equivalent is NO MSEB CONFIG RECORD.
•
BAD CRU CONFIG RECORD indicates a configuration problem. The
NonStop S-series equivalent is BAD MSEB CONFIG RECORD.
•
CRU CONFIG FETCH ERR indicates a configuration problem. The
NonStop S-series equivalent is MSEB CONFIG FETCH ERROR.
Port The port number on the PIC located in slot 2 of the p-switch to which the
ServerNet cable is attached
Port Status The status of the p-switch port or cluster switch port. Possible values for are:
•
link alive
•
LINK DEAD
•
RESET
•
LA, DISABLED
•
UNINSTALLED
NNA Prog State The programming state of the NNA on the p-switch. Possible values are
enabled, DISABLED, RESET, ENABLED FOR IBC ONLY, and CONFIG ERR
Node Routing ID The node routing ID on the p-switch and cluster switch
Status for
Neighbor
This attribute does not apply to ports on the p-switch