Manualshelf

SNAX/HLS Diagnosis and Support Manual

ManualsBrandsHP ManualsServerHP Integrity NonStop H-Series
11121314151617181920
Basic Components
Using SNAX/HLS Trace Analysis Program
2–2 104706 Tandem Computers Incorporated
The nature of the entity represented by the term
line-name
and
lu-name
depends
on the Tandem SNA access method you use. For example, if you are using SNAX/XF
as the access method,
line-name
refers to the SNAX/XF line and
lu-name
refers to the SNAX/XF LU on the SNAX/XF line. If you are using
SNAX/CDF as the access method,
line-name
refers to the SNAX/CDF process
name and
lu-name
refers to the SNAX/CDF OPENNAME of an APPL defined to the
SNAX/CDF process.
LU-specifier
can have one of the following forms:
[ $
line-name
.#
lu-name
]
[ #
lu-name
]
[ $
line-name
.* ]
[ * ]
[ *.* ]
The first form designates the specific SNAX/HLS LU.
The second form designates the specified SNAX/HLS LU on the default
line-name
(see “ASSUME Command,” in this section).
The third form designates all SNAX/HLS LUs on the specified
line-name
.
The fourth form designates all SNAX/HLS LUs on the default
line-name
(see
“ASSUME Command,” in this section).
The fifth form designates all SNAX/HLS LUs on all line-names known to the
SNAX/HLS process.