SNAX/HLS Diagnosis and Support Manual

Command Dictionary

Using SNAX/HLS Trace Analysis Program

2–18 104706 Tandem Computers Incorporated

INFO Command The INFO command displays for selected LUs the PROFILE information, the BIND

information, and information related to session initialization.

INFO

LU-specifier

is an LU specifier list in one of the basic forms. For more information, refer to the

“Basic Components” subsection.

Considerations

All information displayed by using the INFO command is obtained from the trace

ETT. Because the ETT entries are established when the LU trace is started, the

INFO command provides the values at session initialization. The SNAX/HLS

application might change some attributes (LMO, translation, and response type)

by using the SET-ATTRIBUTES verb. In this situation, the modified values of the

attributes are not recorded.

An LU must have previously been selected to appear in INFO command output.

Examples

This command displays information on the LU requested:

@INFO $SNA1.#LU1

This command displays information on all LUs

line-name

$SNA1:

@INFO $SNA1.*

This command displays information on #LU1 on the default

line-name

(see

ASSUME command):

@INFO #LU1

Figure 2-2 shows an example of the INFO command display.