SNAX/HLS Diagnosis and Support Manual

SNAX/HLS Log Messages
104706 Tandem Computers Incorporated C–3
process nam e : Backup started in CPU n
Cause. The backup process has been initiated in CPU n.
Effect. None.
Recovery. Informational message. No action necessary.
process name : Backup process in CPU n stopped
Cause. The backup process in the CPU specified in n terminated as expected.
Effect. None.
Recovery. Informational message. No action necessary.
process name : Character map name not on file name
Cause. The charactermap you specified is not on the charactermap file.
Effect. The process terminates.
Recovery. Inspect the process you used to initiate this process. If you are using a
command interpreter, make sure it identifies the CHARMAPNAME configuration
parameter with the proper charactermap. If it is initiated from within an application,
make sure it is specifying a valid map name and starting it properly.
process name : Continuation of EMS recording for collector-n from
file name of old collector
Cause. An operator switched the event collector function for the alternate collector
number n (where n can be 1, 2, or 3) to the collector at which this message appears.
Effect. The event collector function for the alternate collector number n, has been
switched form the old-collector to another collector.
Recovery. Informational message. No action necessary.