SNAX/HLS Diagnosis and Support Manual

SNAX/HLS Log Messages
104706 Tandem Computers Incorporated C–7
process name : Insufficient memory to handle request from process
process nam e
Cause. There is insufficient memory available to handle a request from some other
process.
Effect. The request is rejected.
Recovery. Storage overflow can occur for several reasons:
Insufficient memory
You might have initiated the process with a fixed amount of memory and it has
proven insufficient. Examine the DATAPAGES configuration parameter and adjust as
needed.
Insufficient disk space
Even though you have allowed for extensible memory requirements, the swap volume
may not have sufficient space to accommodate your needs. You should suspect this
cause if this is not the first occurrence of this event.
Overload of process
You might be making too many demands on the process in question. Examine your
load configuration.
process nam e : Internal Program Error: code identifying erro r
Cause. An internal program error in the SNAX/HLS process name occurred.
Effect. The SNAX/HLS process abends.
Recovery. This message should not occur. That it has indicates a serious programming
error has occurred. Note any text that is returned with this message and contact your
Tandem representative.
process name : Invalid value specified for parameter parameter name :
parameter valu e
Cause. A startup command contained a configuration parameter with an invalid value.
Effect. The SNAX/HLS process abends.
Recovery. Correct the parameter value and reissue the command.