SQL/MX 3.2.1 Installation and Upgrade Guide (H06.26+, J06.15+)

* For installation instructions and the latest version requirements, see the Softdoc file delivered with
the product, either on the product CD or on the website for Scout for NonStop Servers, at HP
NonStop eServices portal: https://onepoint.nonstop.compaq.com/.
Starting TMF
To install and then use SQL/MX, it is required that TMF be running and configured for all the data
volumes on which SQL/MX objects are created.
For more information about TMF auditing requirements, configuration guidelines, and considerations
for SQL/MX, see SQL/MX Management Manual and the TMF Planning and Configuration Guide.
The product version of TMF provided on the SUT must be compatible with the installed SQL/MX
version.
When you start the TMF subsystem, only the accessible configured data volumes are started for
transaction processing. You must ensure that the volumes you intend to use for SQL/MX metadata
and audited objects are configured and started for transaction processing. You must also ensure
that the TMF subsystem as a whole is started for transaction processing. You can request status
from TMFCOM by entering the TMFCOM command at the operating-system command interpreter
prompt and then issuing STATUS commands through TMFCOM.
For more information about TMF configuration, see the TMF Reference Manual.
Starting TMF 13