SQL/MX 3.x Installation and Management Guide (H06.22+, J06.11+)

Installing NonStop SQL/MX
HP NonStop SQL/MX Installation and Management Guide—640325-001
3-3
Installing NonStop SQL/MX
3. As needed, use DSM/SCM to install SPRs to obtain the functionality and defect
repair for SQL/MX Release 3.0. Table 3-1 identifies the default SQL/MX release for
each H-series RVU and the SPRs available for installing later releases. For
information about using DSM/SCM, see the DSM/SCM User’s Guide. For
information about installing SPRs, see the H06.nn Software Installation and
Upgrade Guide.
4. If you are using DSM/SCM and your version requires it, run the TACL COPYOSS
macro from $SYSTEM.ZOSSUTL. For information, see the Open System Services
Management and Operations Manual.
MXCS is automatically installed from the SUT to the Guardian environment. For
setup and configuration information, see the SQL/MX Connectivity Service Manual.
NSM/web is automatically installed from the SUT. For setup and configuration
information, see the NSM/web Installation Guide.
5. From a TACL prompt, start the OSS shell by entering:
osh
You are now in the OSS environment.
6. Before running the InstallSqlmx script, change to the correct directory by
entering:
cd /usr/tandem/sqlmx/bin
For a detailed description of InstallSqlmx command syntax, command options,
and informational messages, see Using the InstallSqlmx Script
on page 3-18. The
OSS environment is case-sensitive, so enter all commands in the appropriate
case. You must be a super ID user to execute the InstallSqlmx script.
Before running the InstallSqlmx script, you might want to set your terminal type
to VT320 (from OutsideView) to obtain the most readable block-mode screen
displays.
Table 3-1. SQL/MX Release and SPR Information for H-Series RVUs
Your H-Series
RVU Default SQL/MX Release for This RVU
H06.22 SQL/MX Release 3.0
Caution. InstallSqlmx creates the anchor file and assigns it a security of “N----.” Do not
attempt to change this setting. If you change the security setting and the anchor file is
modified, NonStop SQL/MX will cease to operate on the system.