SSL Reference Manual

Parameter Meaning
CONNECTIONINFOFORMATDETAILED
Specifies the default format for the output of the SSLCOM command
"connections, detail".
CONTENTFILTER Activates content-filtering in run modes TELNETS, PROXYS and PROXYC.
DENYIP Limits allowed remote IP addresses.
DESTIPADDR
DESTIPPORT
Sets the destination IP address and port for an EXPANDS tunnel.
DNSRESOLVERTCPIPPROCESSNAME Can be used to explicitly set a TCP/IP process name for DNS resolution.
DONOTWARNONERROR Log selected errors with LOGLEVEL 20 rather than as WARNING.
DYNAMICROUTINGENABLEIPV6
Causes the expected separator between the target host IP address and the target
port to be a pipe symbol ('|') instead of a colon (':'). To be used only with
ROUTINGMODE D (dynamic).
EXPANDCOMPRESSION Controls if compression is used in Expand mode.
EXPANDENCRYPTION Can be used to disable encryption in EXPAND mode.
FTPALLOWPLAIN Allows plain FTP traffic when HP NonStop SSL is run in FTPS mode.
FTPCALLOW200REPLY Sets compatibility for older FTP/TLS servers when run in FTPC mode.
FTPLOCALDATAPORT
Controls the value of the local port on the NonStop system of the data
connection in FTPC mode with PASSIVE set to TRUE.
FTPMAXPORT
The maximum port number HP NonStop SSL will use for FTP data
connections.
FTPMINPORT
The minimum port number HP NonStop SSL will use for FTP data
connections.
HASHALGORITHMS
Configures which hash algorithms are used for the fingerprint validation of the
server.
HEAPSIZELIMIT Controls the maximum heap size to be used by the process.
INTERFACE
Controls the IP address HP NonStop SSL will bind to for connections made to
HP NonStop SSL.
IPMODE Specifies the TCP/IP mode (IPv4/IPv6/Dual) HP NonStop SSL will run in.
KEEPALIVE Specifies if keep alive messages are sent to TCP/IP sockets.
LOGCONSOLE Determines if log messages are written to a console.
LOGEMS Determines if log messages are written to EMS.
LOGFILE Determines if log messages are written to a file.
LOGFILERETENTION Controls the number of log files kept after rollover occurs.
LOGFORMAT
Controls the format of the log messages that are written to the console or log
file.
LOGFORMATCONSOLE Controls the format of the log messages that are written to the console.
LOGFORMATEMS Controls the format of the log messages that are written to EMS.
LOGFORMATFILE Controls the format of the log messages that are written to a log file.
LOGLEVEL Determines which messages will be written the log file.
LOGLEVELCONSOLE Allows setting a different log level for LOGCONSOLE output.
LOGLEVELEMS Allows setting a different log level for LOGEMS output.
LOGLEVELFILE Allows setting a different log level for LOGFILE output.
LOGLEVELTCPCONNECTMESSAGE Controls the log level used to log an incoming TCP/IP connection.
LOGMEMORY Allows regular logging of HP NonStop SSL’s memory usage to the log output.
LOGMAXFILELENGTH Controls the maximum size of the log file.
34 • Configuration HP NonStop SSL Reference Manual