SSL Reference Manual

Parameter Meaning
MAXSESSIONS
Limits the number of parallel connections in run modes PROXYS, PROXYC,
TELNETS.
MAXVERSION Maximum admissible SSL/TLS protocol version.
MINVERSION Minimum admissible SSL/TLS protocol version.
PASSIVE Sets the direction of the data socket connections in FTPC mode.
PEERCERTCOMMONNAME For verification of remote certificates.
PEERCERTFINGERPRINT For verification of remote certificates.
PORT The port the HP NonStop SSL server listens on for incoming connections.
PTCPIPFILTERKEY Sets the filter key to enable round robin filtering.
ROUTINGMODE
Controls how SSLOBJ routes traffic to the target, either static (default) or
dynamic (usually not needed).
SERVCERT File name of a DER encoded X.509 server certificate.
SERVKEY The private key to be used for the server certificate.
SERVKEYPASS Password for reading the (encrypted) private key file.
SLOWDOWN
Adds delay to processing resulting in slower encryption/decryption with less
CPU usage.
SOCKSHOST
SOCKSPORT
SOCKSUSER
Configure HP NonStop SSL as SOCKS Version 4 client in run modes FTPC or
PROXYC.
SRCIPADDR
SRCIPPORT
Sets the source IP address and port for an EXPANDS tunnel.
SUBNET
The name of the TCP/IP process HP NonStop SSL should listen on for
connections.
SSLCOMSECURITY Restricts the execution of SSLCOM commands.
TARGETHOST The IP address or name of the host that connections should be routed to.
TARGETINTERFACE Controls the IP address HP NonStop SSL binds to for outgoing connections.
TARGETPORT The port number that connections should route routed to.
TARGETSUBNET
The name of the TCP/IP process HP NonStop SSL should use for outgoing
connections.
TCPIPHOSTFILE Sets the DEFINE = TCPIP^HOST^FILE.
TCPIPNODEFILE Sets the DEFINE = TCPIP^NODE^FILE.
TCPIPRESOLVERNAME Sets the DEFINE = TCPIP^RESOLVER^NAME.
TCPNODELAY Activates RFC1323 on all sockets.
TRUST
When running as SSL client: list of trusted CA or server certificate files or
fingerprints.
ALLOWCERTERRORS
Use this parameter to allow selective overriding of certificate validation errors.
Parameter Syntax
ALLOWCERTERRORS number1 [, number2, ...]
Arguments
number
HP NonStop SSL Reference Manual Configuration • 35