SSL Reference Manual

Example
EXPANDCOMPRESSION TRUE
Considerations
• For compression to work, both SSLOBJ processes across an EXPAND connection must be version AAI or later.
It is possible to have only one side of the connection use compression.
• Compression can be enabled/disabled while the SSLOBJ process is running by using the corresponding
SSLCOM command SET EXPANDCOMPRESSION {ON|OFF}
EXPANDENCRYPTION
This parameter controls whether encryption is used for EXPAND connections. For obvious security reasons it is not
recommended to disable the by default active EXPAND encryption.
Parameter Syntax
EXPANDENCRYPTION {TRUE*|FALSE}
Example
EXPANDENCRYPTION FALSE
Considerations
• This parameter should be only used where speed of transfer is very important and encryption is *not* required.
• The parameter value can not be changed via SSLCOM during runtime.
• The parameter value needs to be identical for both SSLOBJ processes for a given EXPAND line across two
systems.
FTPALLOWPLAIN
Use this parameter to specify whether HP NonStop SSL will allow unencrypted FTP sessions when running in FTPS
mode.
Parameter Syntax
FTPALLOWPLAIN boolean
Arguments
boolean
If set to TRUE or 1 or Yes, HP NonStop SSL will allow unencrypted traffic.
Default
If omitted, HP NonStop SSL will *not* allow unencrypted traffic
Example
FTPALLOWPLAIN TRUE
Considerations
• This parameter is relevant only if HP NonStop SSL is running in the FTPS mode.
HP NonStop SSL Reference Manual Configuration • 57