SSL Reference Manual

FTPCALLOW200REPLY
Use this parameter to specify whether HP NonStop SSL will allow an illegal "200" response to the AUTH TLS
command sent to the remote FTP/TLS server.
Parameter Syntax
FTPCALLOW200REPLY boolean
Arguments
boolean
if set to TRUE or 1 or Yes, HP NonStop SSL will allow the illegal response.
Default
If omitted, HP NonStop SSL will *not* allow the illegal 200 response.
Example
FTPCALLOW200REPLY TRUE
Considerations
• This parameter is relevant only if HP NonStop SSL is running in the FTPC mode.
• The FTP/TLS specification requires a "234" reply code to the AUTH TLS command. This parameter has been
added to support some older FTP/TLS server with HP NonStop SSL in FTPC mode.
FTPLOCALDATAPORT
Use this parameter to specify how HP NonStop SSL will pick the local data port for the data connection in FTPC mode
with PASSIVE set to true.
Parameter Syntax
FTPLOCALDATAPORT number
Arguments
number
0 for “pick a random port” or any specific port number
Default
If omitted, a value of 0 will be used.
Example
FTPLOCALDATAPORT 20
Considerations
• This parameter is relevant only if HP NonStop SSL is running in the FTPC mode with PASSIVE set to TRUE
• Choosing a value other than zero will be firewall-friendly. However, this can result in errors if the remote FTP
server does not choose random data ports itself.
FTPMAXPORT
Use this parameter to specify the maximum port number HP NonStop SSL will use for FTP data connections
Parameter Syntax
58 • Configuration HP NonStop SSL Reference Manual