SSL Reference Manual

• Systems have 8 CPUs each
• TCPIPv6
Configuration:
The following figure shows a complete setup:
The following steps have been performed for the above setup:
1. An Expand Multi-Line path was created on each system.
• 2 CPUs were selected for the LH primary and backup.
• To distribute SSL CPU load over the remaining CPUs, 6 lines were created for the path.
• A unique port number was selected for each line (SRCIPPORT and DESTIPPORT can be identical).
• DESTIPADDR of all lines was set to the loopback address (127.0.0.1).
2. Six HP NonStop SSL EXPANDS persistent processes were created on both systems.
• A different CPU was selected for each SSL process.
HP NonStop SSL Reference Manual Configuration • 87