Tandem Failure Data System (TFDS) Manual

EMS Messages and Templates
HP Tandem Failure Data System (TFDS) Manual—540122-003
A-10
EMS Messages
specified file name, so the trace file name you specify must not exceed six characters
in length.
57
Cause. An incorrectly formatted trace command was specified.
Effect. Tracing does not start.
Recovery. Retype the TRACE-HELPER command using correct syntax.
58
Cause. The TFDS helper process encountered an unexpected internal error.
Effect. The TFDS helper process continues to execute if the error is recoverable, or it
stops if the error is unrecoverable.
Recovery. If the TFDS helper process is not restarted automatically in the same
processor, start this process manually.
59
Cause. The TFDS helper process was unable to save the snapshot file to the
requested location.
Effect. The snapshot file is saved to the indicated location instead.
Recovery. Informational message only; no corrective action is needed.
60
Cause. The TFDS helper process encountered an error from the Visual Inspect
snapshot server.
Effect. The snapshot file is not saved, but other failure incident data processing is
performed.
TFDS $ZDMP : TFDSHLP invalid trace command Command specified:
xxxxxxxx
TFDS $ZDMP : TFDSHLP internal error. Summary: xxxxxxxx.
Source file: xxxxxxxx Line number: nn
TFDS $ZDMP : TFDSHLP snapshot file saved to different
location. Snapshot location requested: xxxxxxxx Snapshot
location used: xxxxxxxx
TFDS $ZDMP : TFDSHLP Snapshot Server Error. Snapshot file not
saved: xxxxxxxx