Tandem Failure Data System (TFDS) Manual

EMS Messages and Templates
HP Tandem Failure Data System (TFDS) Manual—540122-003
A-11
EMS Messages
Recovery. Informational message only; no corrective action is needed.
61
Cause. The TFDS helper process approached a time-out threshold waiting for an
action to complete.
Effect. The TFDS helper process continues waiting for a response.
Recovery. Informational message only; no corrective action is needed.
Recovery. start this process manually.
62
Cause. The TFDS helper process encountered time-outs twice while waiting for an
action to complete.
Effect. TFDSHLP sends the EMS message directly to $ZLOG and finishes processing
the incident. The incident might not be recorded in the incident database.
Recovery. Informational message only; no corrective action is needed.
63
Cause. The TFDS helper process did not receive a completion indication from the
Visual Inspect snapshot server (INSPSNAP) within the required period of time.
Effect. The TFDS helper process continues to wait for a response from the
INSPSNAP. The TDFS client process remains in a debug state until INSPSNAP
completes.
Recovery. If you need to free the TFDS client, stop the INSPSNAP process in the
CPU where the client is running. (This causes the session to be given back to the
TFDS helper process so that the incident can complete its processing.)
TFDS $ZDMP : TFDSHLP Incident processing timeout warning.
Incident age: hh:mm:ss
TFDS $ZDMP : TFDSHLP Incident processing timeout, releasing
client process. Incident age: hh:mm:ss
TFDS $ZDMP : TFDSHLP Incident warning. Snapshot Server has
not completed saving client image. Incident age: hh:mm:ss