Tandem Failure Data System (TFDS) Manual

EMS Messages and Templates
HP Tandem Failure Data System (TFDS) Manual—540122-003
A-13
EMS Messages
Additional-text-n is the message text supplied by the caller for an instrument
incident.
For a processor down incident, these fields contain: TFDS VPROC, TFDS
CONFIGURATION options, trace filename, whether an operator halt occurred, and
time metrics.
ZDMP-TKN-DIPID
DIPID-Error-Location is either:
•
For an instrument incident, the unique identifier of the failure specified by the
caller.
•
For a processor down incident, either a unique identifier of the failure or the
halt code.
ZDMP-TKN-DUMP-ADDR1
ZDMP-TKN-DUMP-ADDR2
ZDMP-TKN-DUMP-ADDR3
ZDMP-TKN-DUMP-ADDR4
ZDMP-TKN-DUMP-ADDR5
Selected-Dump-Address-n is the starting address of the data field specified by
the caller for an instrument incident.
ZDMP-TKN-DUMP-FILE-NAME
Dump-Filename is either:
•
For an instrument incident, the Snapshot filename specified by the caller, the
default Snapshot filename (PROCIMAG), or an empty token (if a Snapshot file
was not requested). The filename specifies the location of the file.
•
For a processor down incident, the dump filename if a dump file was created.
The filename specifies the location of the file.
ZDMP-TKN-DUMP-LEN1
ZDMP-TKN-DUMP-LEN2
ZDMP-TKN-DUMP-LEN3
ZDMP-TKN-DUMP-LEN4
ZDMP-TKN-DUMP-LEN5
Selected-Dump-Length-n is the length in bytes of the data field specified by
the caller for an instrument incident.
ZDMP-TKN-DUMP-SEG1
ZDMP-TKN-DUMP-SEG2
ZDMP-TKN-DUMP-SEG3
ZDMP-TKN-DUMP-SEG4
ZDMP-TKN-DUMP-SEG5
Selected-Dump-Area-n is the segment number where the data is located
specified by the caller for an instrument incident.