Tandem Failure Data System (TFDS) Manual

EMS Messages and Templates
HP Tandem Failure Data System (TFDS) Manual—540122-003
A-15
EMS Messages
ZDMP-TKN-RTLVPROC
RTL Version is the VPROC of the RTL being used for a Legacy API instrument
or the Trigger API's VPROC.
ZDMP-TKN-PERCEIVED-SEVERITY
Severity is the severity of the instrument or processor down incident. For an
instrument, the severity is assigned by the caller or overridden by the ADD
command.
ZDMP-VAL-SEVERITY-CRITICAL 0
ZDMP-VAL-SEVERITY-MAJOR 1
ZDMP-VAL-SEVERITY-MINOR 2
ZDMP-VAL-SEVERITY-WARNING 3
ZDMP-VAL-SEVERITY-INFORMATIVE 4
ZDMP-VAL-SEVERITY-INDETERMIN 5
ZDMP-TKN-PROC-CALL-ENTRY
Proc call entry is a line in the stack trace for an instrument or processor
down incident. There can be more than one ZDMP-TKN-PROC-CALL-ENTRY
token. The stack trace is extracted from the caller, or from the program that
caused the processor halt.
ZDMP-TKN-JUST-TEXT
Text is used for including data (if the instrument specifies to include the data
starting at address ZDMP-TKN-DUMP-ADDRn), configuration options, and text
messages for an incident.
ZDMP-TKN-ANY-POINTER
Any-Pointer is a pointer reported by the Trigger API instrument.
ZDMP-TKN-DESC-SINGLE-MSG
Additional-text-Sngl-Msg is a single message reported by the Trigger API
instrument.
ZDMP-TKN-DUMP-SINGLE-DATA
Selected-Dump-Sngl-Data is a single data item reported by the Trigger API
instrument.
ZDMP-TKN-INTERFACE-VERSION
Interface-version is the interface version for an instrument incident.
ZDMP-TKN-ORIGINAL-SEVERITY
Original Severity is the original severity before the severity override (from the
ADD command) was performed for an instrument incident. Refer to the description
of ZDMP-TKN-PERCEIVED-SEVERITY on page A-15.