Tandem Failure Data System (TFDS) Manual

EMS Messages and Templates
HP Tandem Failure Data System (TFDS) Manual—540122-003
A-23
Templates for EMS Support
MSG: ZEMS-TKN-EVENTNUMBER, ZDMP-EVT-HLP-TRIGGER-TOO-NEW
"TFDS <1>: Client process "
"<*IF 2><3><*ENDIF> used a newer trigger value than"
" is supported by the currently running TFDSHLP."
" Please ensure the proper version of TFDS is installed."
1: ZDMP-TKN-CRTPIDN, FILE
2: TOKENPRESENT(zdmp-tkn-client-process-name)
3: zdmp-tkn-client-process-name, FILE
MSG: ZEMS-TKN-EVENTNUMBER, ZDMP-EVT-HLP-TRIGGER-UNKNOWN
"TFDS <1>: TFDSHLP client process is using an unknown"
" trigger value. TFDSHLP is unable to process this incident."
" Client Program file: <2>"
" Trigger value: <3>"
1: ZDMP-TKN-CRTPIDN, FILE
2: zdmp-tkn-client-obj-name, FILE
3: zdmp-tkn-hlp-trigger, ZH2
MSG: ZEMS-TKN-EVENTNUMBER, ZDMP-EVT-HLP-MON-INCOMPATIBLE
"TFDS <1>: TFDSHLP is incompatible with the TFDS"
" Monitor. TFDSHLP version: <2>"
1: ZDMP-TKN-CRTPIDN, FILE
2: zdmp-tkn-vproc, A56
MSG: ZEMS-TKN-EVENTNUMBER, ZDMP-EVT-HLP-COM-INCOMPATIBLE
"TFDS <1>: TFDSHLP is incompatible with TFDSCOM."
" TFDSHLP version: <2>"
1: ZDMP-TKN-CRTPIDN, FILE
2: zdmp-tkn-vproc, A56
MSG: ZEMS-TKN-EVENTNUMBER, ZDMP-EVT-HLP-EMS-TO-MON-FAILED
"TFDS <1>: TFDSHLP unable to send EMS message to TFDS monitor"
" for client process <2>."
"<*IF 3>WRITEREADX returned file system error <4>.<*ENDIF>"
1: ZDMP-TKN-CRTPIDN, FILE
2: zdmp-tkn-client-process-name, FILE
3: TOKENPRESENT(zdmp-tkn-hlp-error-code)
4: zdmp-tkn-hlp-error-code, I1
MSG: ZEMS-TKN-EVENTNUMBER, ZDMP-EVT-HLP-TRC-STARTED
"TFDS <1>: TFDSHLP Trace started."
" Trace Level: <2>"
" Trace filename: <3>"
1: ZDMP-TKN-CRTPIDN, FILE
2: ZDMP-TKN-HLP-TRACE-LEVEL, ZI2
3: ZDMP-TKN-HLP-TRACE-FILE, FILE
MSG: ZEMS-TKN-EVENTNUMBER, ZDMP-EVT-HLP-TRC-STOPPED
"TFDS <1>: TFDSHLP Trace stopped."
" Trace file <2> closed."
1: ZDMP-TKN-CRTPIDN, FILE
2: ZDMP-TKN-HLP-TRACE-FILE, FILE