Tandem Failure Data System (TFDS) Manual

Best Practices
HP Tandem Failure Data System (TFDS) Manual—540122-003
D-2
Use Default Values for Key Attributes
Use Default Values for Key Attributes
You should use these default values for key TFDS configuration attributes:
•
BURSTSUPPRESSION ON (For more information, see BURSTSUPPRESSION on
page 3-13.)
•
AUTODUMP ON (For more information, see AUTODUMP on page 3-7.)
•
AUTOREINTEGRATE ON (For more information, see AUTOREINTEGRATE on
page 3-8.)
•
AUTORELOAD ON (For more information, see AUTORELOAD on page 3-8.)