Tandem Failure Data System (TFDS) Manual

Managing and Configuring TFDS
HP Tandem Failure Data System (TFDS) Manual—540122-003
2-2
Common Tasks
Viewing Processor Status
To view processor status and reload states, use the TFDSCOM STATUS command.
For example:
tfdscom> status
TFDS current environment @ 08Jun2005 13:51:52
CPU TFDS CPU CPU Time of Last Time of Last
No State Status Dn Rl Failure Load
-- ------------- -------- -- -- ------------------ ------------------
0 Up Enabled 0 0 N/A 08Jun2005 03:28:46
1 Up Enabled 0 0 N/A 08Jun2005 03:30:09
2 Up Enabled 0 0 N/A 08Jun2005 03:30:20
3 Dumping N/A 1 0 08Jun2005 13:50:54 N/A
4 Down Enabled 0 0 N/A N/A
5 Down Enabled 0 0 N/A N/A
6 Down Enabled 0 0 N/A N/A
7 Down Enabled 0 0 N/A N/A
8 Down Enabled 0 0 N/A N/A
9 Down Enabled 0 0 N/A N/A
10 Down Enabled 0 0 N/A N/A
11 Down Enabled 0 0 N/A N/A
12 Down Enabled 0 0 N/A N/A
13 Down Enabled 0 0 N/A N/A
14 Down Enabled 0 0 N/A N/A
15 Down Enabled 0 0 N/A N/A
AutoReintegrate ON
AutoReload ON , Delay 0 seconds
AutoStifle 03 Times in 24 Hours