Tandem Failure Data System (TFDS) Manual

Using TFDSCOM
HP Tandem Failure Data System (TFDS) Manual—540122-003
3-16
TFDSCOM Commands
EXCLUDEFILES TEMP option. These file names are cleared when the next dump
is done or if TFDS is stopped. (For more information, see EXCLUDEFILES on
page 3-21.)
•
Because you can change configuration file settings by using TFDSCOM
commands and then saving the file, you are not required to use other means to
edit the configuration file. If you edit the file and want to add notes to it, use the
comment character (!). If you start a line with an exclamation point followed by a
space, you can add text that TFDS does not try to interpret as a command.
Examples
CONFIG
C
CONFIG DETAIL
CD
CPUS
The Configuration fileCPUS command returns a TFDS view of the processors in the
system.
The CPUS command is equivalent to the STATUS command without the HELPERS
option. For guidelines and examples, see STATUS on page 3-36.
Example
CPUS
DB-SUBVOL
The DB-SUBVOL command specifies the location where TFDS creates or finds the
incident database.
subvolume-name
represents a subvolume location for an incident file in the form $volume.subvol.
Guidelines
•
You can use the abbreviation db in place of DB-SUBVOL.
•
If the incident database location is not provided, by default TFDS uses the location
where TFDS is running (usually $system.ztfds).
CPUS
DB-SUBVOL subvolume-name