Tandem Failure Data System (TFDS) Manual

Using TFDSCOM
HP Tandem Failure Data System (TFDS) Manual—540122-003
3-35
TFDSCOM Commands
Guidelines
•
If no file name is specified, the current configuration file name is used. To display
the configuration file name, use the CONFIG command.
•
All configuration file attributes are written to the save file, whether the attributes
have default or assigned values.
•
The filename variable has to be a type 101 EDIT file. If this file does not exist, it
is generated. If the file already exists, the contents are overwritten.
•
If you select a network file name, remote passwords must be in place so you can
write to the target system.
•
For more information on the TFDS configuration file, see Configuring TFDS on
page 2-7.
Example
This example names the current TFDS configuration (TFDSCNFG) and saves it in a
specific location ($GAMMA.TFDS):
SAVE $GAMMA.TFDS.TFDSCNFG
STATS HELPERS
The STATS HELPERS command provides statistical information about the TFDS
helper processes.
Guideline
If the statistical information is not available from the TFDS helper, one of these
messages is displayed:
Helper not running
indicates the TFDS helper process is not running on this processor.
Helper not responding
indicates a time-out occurred when attempting to communicate with the TFDS
helper process.
Helper on wrong CPU
indicates the TFDS helper process name for this processor is running on a
different processor.
CPU down
indicates the processor is down.
STATS HELPERS