Tandem Failure Data System (TFDS) Manual

HP Tandem Failure Data System (TFDS) Manual—540122-003
A-1
A EMS Messages and Templates
The Event Management Service (EMS) receives and logs information about important
events that occur in TFDS and the TFDSCOM user interface. This appendix defines
each EMS message that TFDS can send, and provides templates for customizing
operator messages. These topics are addressed:
•
Overview of TFDS EMS Event Messages on page A-1
•
EMS Messages on page A-2
•
Templates for EMS Support on page A-18
Overview of TFDS EMS Event Messages
TFDS event messages can be identified by the subsystem name DMP. These event
messages include:
•
TFDS configuration file errors (See message 20 on page A-3.)
•
Processing abnormalities (See message 21 on page A-4.)
•
Normal TFDS processing status information. (See messages 22 on page A-4
through 31 on page A-5.)
•
TFDS helper process status and error messages. (See messages 41 on page A-5
through 63 on page A-11.)
•
Client software failures. (See message 6001 on page A-12.)
•
Incident errors generated by either a halted processor or an instrumented
subsystem. (See message 7000 on page A-17.)
If you are developing or customizing operator messages for TFDS, see Templates for
EMS Support on page A-18.