Tandem Failure Data System (TFDS) Manual

EMS Messages and Templates
HP Tandem Failure Data System (TFDS) Manual—540122-003
A-6
EMS Messages
42
Cause. The TFDS helper process is stopping.
Effect. The TFDS helper process stops.
Recovery. If the TFDS helper process is not restarted automatically in the same
processor, start this process manually.
43
Cause. Failure incident processing was interrupted.
Effect. Failure incident processing resumes when the TFDS helper process is
restarted.
Recovery. Informational message only; no corrective action is needed.
44
Cause. The TFDS helper process was unable to purge a snapshot file because it
found one already in existence where it needed to create a new one.
Effect. The snapshot file is unneeded by TFDS and it is now wasting disk space.
Recovery. Check whether or not the file security caused the problem. Check whether
or not someone has the file open and close it if necessary. Purge the snapshot file
manually.
45
Cause. The TFDS helper process was unable to pass control to the Visual Inspect
snapshot server (INSPSNAP).
Effect. An Inspect Snapshot file is not captured. All other processing for this incident
should proceed normally.
TFDS $ZDMP : TFDSHLP stopping, CPU : nn
TFDS $ZDMP : TFDSHLP continuing the processing of event for
client process xxxxxxxx. Program file: xxxxxxxx
TFDS $ZDMP : TFDSHLP unable to purge snapshot file. Snapshot
filename: xxxxxxxx. Client process name: xxxxxxxx. File
system error returned: nn
TFDS $ZDMP : TFDSHLP unable to switch to the Snapshot Server.
Client process name: xxxxxxxx. Error returned from Debug
Services: nn.