Tandem Failure Data System (TFDS) Manual

EMS Messages and Templates
HP Tandem Failure Data System (TFDS) Manual—540122-003
A-8
EMS Messages
49
Cause. The TFDS helper process has determined that the version of TFDSCOM is not
compatible with the version of the TFDS helper.
Effect. TFDSHLP will not respond to commands issued from TFDSCOM. Incident
processing will continue as normal.
Recovery. Check for version inconsistencies between the TFDS helper and
TFDSCOM. Reinstall TFDS if necessary.
50
Cause. The TFDS helper process was unable to send an EMS message to the TFDS
monitor.
Effect. TFDSHLP sends this message directly to $ZLOG. Rediscovery is not
performed and this incident is not recorded in the incident database.
Recovery. Ensure that $ZDMP is running.
51
Cause. Tracing has been turned on for the TFDS helpers.
Effect. TFDS helper process tracing begins.
Recovery. Informational message only; no corrective action is needed.
52
Cause. Tracing of the TFDS helper processes has been turned off.
Effect. TFDS helper process tracing stops.
Recovery. Informational message only; no corrective action is needed.
TFDS $ZDMP : TFDSHLP is incompatible with TFDSCOM. TFDSHLP
version: xxxxxxxx
TFDS $ZDMP : TFDSHLP unable to send EMS message to TFDS
monitor for client process xxxxxxxx. returned file system
error nn
TFDS $ZDMP : TFDSHLP Trace started. Trace Level: nn Trace
filename: xxxxxxxx
TFDS $ZDMP : TFDSHLP Trace stopped. Trace file xxxxxxxx
closed.