TMF Management Programming Manual (H06.05+)

Commands and Responses
HP NonStop TMF Management Programming Manual—540140-002
5-84
DUMP FILES
ZMedium
specifies the type of storage media on which this dump is recorded. This field
is required. The following values are valid:
ZMaxDumpSize
for dumps to disk, specifies the maximum size of the dump. Valid are in the
range from 20x1024 bytes to 10x1024x1024 bytes. If this field is null, the
default value is determined at run time by TMF.
If you omit this field, the default value is 0.
ZSystemName
for dumps to tape, specifies the name of the system on which the audit dump
process performs automatic volume recognition (AVR) on the first parallel copy.
If you omit this field, the default value is the name of the local system.
If you specify a remote node for dumps to tape, Guardian labeled-tape
processing must be enabled on that node and must be running on RVU C30 or
later of the NonStop OS. TMF, however, need not be configured or running on
the remote node.
ZSystemName2
for dumps to tape, specifies the name of the system on which the audit dump
process performs automatic volume recognition (AVR) on the second parallel
copy.
If you omit this field, the default value is the name of the local system.
If you specify a remote node for dumps to tape, Guardian labeled-tape
processing must be enabled on that node and must be running on RVU C30 or
later of the NonStop OS. TMF, however, need not be configured or running on
the remote node.
Usage Guidelines
Only super-group users can issue this command. TMF must be started.
For more information about the DUMP FILES command, see the TMF Reference
Manual.
ZTMF-VAL-MediumTape Tape storage media.
ZTMF-VAL-MediumMagneticDisk Magnetic disk storage media.