TMF Management Programming Manual (H06.05+)

Commands and Responses
HP NonStop TMF Management Programming Manual—540140-002
5-171
STATUS DATAVOLS
ZTMF-MAP-Status-DataVols-R
is an extensible structured token containing status information for the specified
data volume. This token contains the following fields:
ZState
specifies the state of the data volume.
ZRecoveryMode
specifies the recovery mode setting (either online or archive).
Usage Guidelines
Any user can issue this command. TMF must be started or in the process of stopping.
Multiple response records are allowed to enable the command to return all the
requested information.
If TMF is in the process of stopping, this command may return a status of ZTMF-VAL-
Unknown for some configured data volumes. This status is reported because the
subsystem cannot discern the difference between a volume that has been shut down
during execution of a STOP TMF command and one that is not a configured data
volume; Unknown indicates that either condition is possible.
If TMF is stopping and the wild card is specified for ZTMF-VAL-VolumeName, this
command returns only the status of configured data volumes that have not already
been shut down.