TMF Management Programming Manual (H06.05+)

Event Messages
HP NonStop TMF Management Programming Manual—540140-002
6-283
Descriptions of Event Messages
Effect
Current transaction processing continues, but new transactions cannot be started.
Recommended Action
If you did not issue a DISABLE BEGINTRANS command, examine the message text
and try to ascertain the problem. If possible, correct the situation.
This problem most often occurs because there is no available audit-trail file. If that is
the case, ensure that dump volumes are available and that there are overflow-audit
volumes configured for the audit trail. If both of these conditions are met, try adding
another active-audit volume or increasing the files per volume attribute value.
If the problem persists, contact your service provider and provide all relevant
information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and versions of all
related products as well.