TMF Management Programming Manual (H06.05+)

Event Messages
HP NonStop TMF Management Programming Manual—540140-002
6-428
Descriptions of Event Messages
ZTMF-TKN-ZLTCH-State
specifies the new commit-hold state that could not be set. The values are:
ZEMS-TKN-Emphasis
is set to True for this event.
Effect
The commit-hold state of the specified audit-trail volume remains unchanged.
Recommended Action
Refer to the Guardian Procedure Errors and Messages Manual for corrective action for
the indicated error number. Try to resolve the problem. The subsystem periodically
attempts to restart the TMP. If the problem persists, contact your service provider and
provide all relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and versions of all
related products as well.
ZTMF-VAL-ZLTCH-Unconfigured Unconfigured.
ZTMF-VAL-ZLTCH-On On.
ZTMF-VAL-ZLTCH-Off Off.
ZTMF-VAL-ZLTCH-Activate Activated.
ZTMF-VAL-ZLTCH-Suspend Suspended.
ZTMF-VAL-ZLTCH-Reviving Reviving.
ZTMF-VAL-ZLTCH-Unsupported Unsupported.