TMF Management Programming Manual (H06.05+)

Error and Warning Messages
HP NonStop TMF Management Programming Manual—540140-002
7-5
Errors
30 ZTMF-ERR-INVALIDVOLUME
The specified volume name is invalid.
The ZTMF-TKN-VOLUME token supplied within the error list provides
additional information.
31 ZTMF-ERR-VOLUMEREMOTE
In this context, a volume name may not be remote.
The ZTMF-TKN-VOLUME token supplied within the error list provides
additional information.
33 ZTMF-ERR-INVALIDCOPIES
The COPIES attribute must specify a value of 1 or 2 for PARALLEL copies—or
a value between 1 and 3 for SERIES copies.
34 ZTMF-ERR-INVALIDPRIORITY
The PRIORITY attribute must specify a value between 1 and 199.
35 ZTMF-ERR-INVALIDOUTFILE
The specified OUT filename is invalid or specified with the wildcard (*) syntax.
The ZTMF-TKN-FILENAME token supplied within the error list provides
additional information.
36 ZTMF-ERR-INVALIDCPU
The CPU attribute specification is invalid. A value from 0 to 15 must be
specified.
37 ZTMF-ERR-INVALIDDENSITY
The specified tape density value is invalid.
38 ZTMF-ERR-INVALIDTAPEDRIVE
The specified tape drive name is invalid or specified with the wildcard (*) syntax.
The ZTMF-TKN-TAPEDRIVE token supplied within the error list provides
additional information.
39 ZTMF-ERR-INVALIDSTARTFILENAME
The specified START filename is invalid.
The ZTMF-TKN-FILENAME token supplied within the error list provides
additional information.