TMF Management Programming Manual (H06.05+)

Error and Warning Messages
HP NonStop TMF Management Programming Manual—540140-002
7-56
Archive Tape Errors and Warnings
8029 Tape record header length is bad (Record length in header: ZART-
TKN-HEADERRECORDLEN, actual record length: ZART-TKN-
RECORDLEN).
The record length specified in the tape header record differs from the actual
record length. This could be caused by corruption of the tape, dirty tape drive
heads, faulty tape drives, or a software bug in the dump or restore program.
8030 Tape record is out of sequence. (Expected sequence number: ZART-
TKN-EXPECTEDSEQNUM, actual sequence number: ZART-TKN-
SEQNUM).
The tape record is out of sequence. This could be caused by corruption of the
tape, dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
8031 Tape record length is bad (Record length: ZART-TKN-RECORDLEN,
expected length: ZART-TKN-EXPECTEDRECORDLEN, record type:
ZART-TKN-RECORDKIND).
The actual record length differs from the expected record length. This could be
caused by corruption of the tape, dirty tape drive heads, faulty tape drives, or a
software bug in the dump or restore program.
8032 Tape record is less than the minimum allowed. (Record length:
ZART-TKN-RECORDLEN, minimum length: ZART-TKN-
MINIMUMRECORDLEN, record type: ZART-TKN-RECORDKIND).
The actual record length is less than the minimum allowed. This could be
caused by corruption of the tape, dirty tape drive heads, faulty tape drives, or a
software bug in the dump or restore program.
8033 Tape file label is bad.
The tape file label is invalid. This could be caused by corruption of the tape,
dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
8034 Tape end volume label is bad.
The tape end volume label is invalid. This could be caused by corruption of the
tape, dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.