TMF Management Programming Manual (H06.05+)

Error and Warning Messages
HP NonStop TMF Management Programming Manual—540140-002
7-58
Archive Tape Errors and Warnings
8057 Tape format is bad (File label sequence number in end volume label
is incorrect. Expected sequence number: ZART-TKN-
EXPECTEDSEQNUM, actual sequence number: ZART-TKN-
SEQNUM).
The end volume label is invalid. This could be caused by corruption of the tape,
dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
8058 Tape format is bad (File continuation mismatch in end volume label).
The end volume label is invalid. This could be caused by corruption of the tape,
dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
8059 Tape format is bad (File record position mismatch in end volume
label).
The end volume label is invalid. This could be caused by corruption of the tape,
dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
8060 Tape format is bad (File label sequence number in begin volume
label is incorrect. Expected sequence number: ZART-TKN-
EXPECTEDSEQNUM, actual sequence number: ZART-TKN-
SEQNUM).
The begin volume label is invalid. This could be caused by corruption of the
tape, dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
8061 Tape format is bad (File continuation mismatch in begin volume
label).
The begin volume label is invalid. This could be caused by corruption of the
tape, dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
8062 Tape format is bad (File record position mismatch in begin volume
label).
The begin volume label is invalid. This could be caused by corruption of the
tape, dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.