TMF Planning and Configuration Guide (H06.05+)

About This Guide
HP NonStop TMF Planning and Configuration Guide—540136-002
viii
How This Guide Is Organized
How This Guide Is Organized
Section 1, Concepts and Capabilities, describes basic planning and configuration
activities for TMF. It also describes how to delete an entire TMF configuration and why
you might want to do so.
Section 2, Doing an Initial Configuration, provides advice for doing your initial TMF
configuration.
Section 3, Reconfiguring Audit Trails, describes how to reconfigure audit trails and
when you might want to do so.
Section 4, Reconfiguring Transaction Limits, describes how to reconfigure limits for
transactions and when you might want to do so.
Section 5, Configuring TMF for Backup and Recovery, describes TMF backup and
recovery, including configuration of audit dumps.
Section 6, Reconfiguring TMF Processes, describes how to reconfigure TMF
processes and when you might want to do so.
Appendix A, Fallback Considerations, describes various considerations for falling back
from TMF 3.3 to earlier TMF environments.
Appendix B, Configuration Worksheets, provides worksheets for you to use in planning
and recording your TMF configuration. It shows the default values (for parameters that
have defaults) and provides space to enter the values you currently have specified. It
also shows the TMFCOM commands and command parameters you use to specify
each value.
TMF Documentation
Readers of this manual may also refer to the following documentation describing TMF:
Audience Title
All readers TMF Introduction
TMF Glossary
System managers
and operators
TMF Planning and Configuration Guide (This manual)
TMF Operations and Recovery Guide
TMF Reference Manual
Application pro-
grammers
TMF Application Programmer’s Guide
TMF Management Programming Manual