TR3271 Management Programming Manual

COMMANDS AND RESPONSES
LOAD Command
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list. See "SPI Standard Definitions" in Section 5 for details.
Operational Notes
• LOAD is a sensitive command.
• When the command is completed, the line remains in the STOPPED
summary state.
• The line must be in the STOPPED summary state when this
command is issued.
• Use the START command to start the line.
• The RESET command should be issued before the LOAD command,
unless the NOLOAD modifier has been specified at system
generation time.
6-71