TR3271 Management Programming Manual

COMMANDS AND RESPONSES
STATUS Command
ZBPID is a structure that contains the process ID information
for the backup process. ZBPID consists of the following
fields:
ZCPU is the CPU in which the backup process is executing.
ZPIN is the Process Identification Number assigned by the
operating system to identify the backup process in the CPU.
ZPATH is the primary path to the CLIP. The value of this
field can be one of the following:
ZCOM-VAL-PATH-A Path A is the primary path to the CLIP.
ZCOM-VAL-PATH-B Path B is the primary path to the CLIP.
ZCOM-VAL-PATH-UNDEF Path is not yet activated.
Path A and Path B are defined at system generation time.
ZCSM-LDEV is the logical device number of the CSM for the
line.
ZCU-PRIM is the primary path to the LIU for the line.
ZCU-BKUP is the backup path to the LIU for the line.
ZDEBUG is a Boolean variable that specifies whether the CLIP
debug interface is enabled. The value of this field can be
one of the following:
ZTR3-VAL-DEBUG-OFF The CLIP debug interface is not
enabled.
ZTR3-VAL-DEBUG-ON The CLIP debug interface is enabled.
ZTRACE is a Boolean variable that specifies whether the TRACE
interface to CMP is enabled. The value of this field can be
one of the following:
ZSPI-VAL-TRUE The TRACE interface to CMP is enabled.
ZSPI-VAL-FALSE The TRACE interface to CMP is not
enabled.
ZTOTAL-SU is the total number of subdevices attached to the
specified line.
ZTOTAL-SU-OPENED is the total number of subdevices, which are
attached to the specified line, that are open.
6-103