TR3271 Management Programming Manual

COMMANDS AND RESPONSES
CONNECT Command
CONNECT Command
The CONNECT command creates a link between a TR3271 subdevice and
a TR3271 subdevice. Only subdevices can be connected. Once this
command is successfully completed, data can pass between TR3271
terminals and an IBM host through the TR3271 subsystem.
When you use the CONNECT command, the subsystem checks that both
the TR3271 subdevice and the target AM3270 subdevice are in the
STARTED summary state. In addition, they must both be defined as
PTP subdevices. If the TR3271 subdevice is not already defined
as a PTP subdevice, you can redefine it using either the ZPROTO
field in the ALTER command described in this manual, or the
ALTER command described in the Subsystem Control Facility (SCF)
Reference Manual . If the AM3270 subsystem is not supported by
DSM, you can use the CMI ALTER SUBDEVICE command. Refer to
the Communications Management (CMI) Operator’s Guide for more
information.
The lines for the TR3271 and targeted AM3270 subdevice must be in
the STARTED summary state.
Command
ZCOM-CMD-CONNECT
Object Type
ZCOM-OBJ-SU
Tokens in Command Buffer
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING. !{}
ZCOM-TKN-TARGET-MGR token-type ZSPI-TYP-FNAME32.
ZCOM-TKN-TARGET-OBJNAME token-type ZSPI-TYP-STRING. !{}
ZCOM-TKN-TARGET-OBJTYPE token-type ZSPI-TYP-ENUM. !{}
ZCOM-MAP-REQID !MAP is optional, but if present,
!fields are required.
def ZCOM-DDL-REQID.
02 ZCRTPID type ZSPI-DDL-CRTPID.
02 ZPAID type ZSPI-DDL-INT.
end.
ZCOM-TKN-CMD-TIMEOUT token-type ZSPI-TYP-TIMESTAMP.
ZSPI-TKN-MANAGER token-type ZSPI-TYP-FNAME32.
ZSPI-TKN-SSID token-type ZSPI-TYP-SSID. !{}
>
6-31