TR3271 Management Programming Manual

COMMANDS AND RESPONSES
CONNECT Command
ZTR3-ERR-NOT-PTP-SU (5)
Your management application tried to build a link from or to
a subdevice that is not a PTP subdevice. The subdevices that
you connect must both be capable of using the pass-through
protocol.
ZTR3-ERR-TARGET-OBJNAME-INV (10)
The object name for the target AM3270 subdevice does not
comply with the valid format.
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list. This token is described in "SPI Standard Definitions"
in Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
Operational Notes
• CONNECT is a sensitive command.
• The line and subdevice must be in the STARTED summary state
when this command is issued.
• When the command is completed, the lines and subdevices remain
in the STARTED summary state.
• To disconnect the link between the AM3270 and TR3271
subdevices, use the DISCONNECT command.
6-35