TS/MP 2.5 Pathsend and Server Programming Manual

Cause. The ACS Subsystem processes has no links to the server-class and is unable to get a link
from the PATHMON process to satisfy this request. For example, MAXLINKS links for each
server-class are already allocated to other ACS Subsystem processes and TCPs. This is a PATHMON
configuration problem.
Typical file-system error: 0 (FEOK).
Effect. The SERVERCLASS_SEND_ or SERVERCLASS_DIALOG_BEGIN_ call is completed with an
error. The message is not sent to the server process.
Recovery. Increase the maximum number of servers in the server-class (with the PATHCOM
MAXSERVERS parameter) or increase the number of links available to the server (with the PATHCOM
MAXLINKS parameter). For details about the MAXSERVERS and MAXLINKS parameters, see the
NonStop TS/MP 2.5 System Management Manual.
906
FEScNoSendEverCalled
Cause. The SERVERCLASS_SEND_INFO_ procedure is called before SERVERCLASS_SEND_ or
SERVERCLASS_DIALOG_BEGIN_ is ever called by this program. This is a programming error.
Typical file-system error: 0 (FEOK).
Effect. The SERVERCLASS_SEND_INFO_ call is completed with return error 0, Pathsend error 906,
and file-system error 0.
Recovery. Ensure that your application program does not call SERVERCLASS_SEND_INFO_ before
it calls SERVERCLASS_SEND_ or SERVERCLASS_DIALOG_BEGIN_.
NOTE: Error 907, FEScInvalidSegmentId, and error 908, FEScNoSegmentInUse, are not returned
on D-series systems. Error 908 is replaced by error 912, FEScParameterBoundsError.
909
FEScInvalidFlagsValue
Cause. The caller sets bits in the flags parameter that are reserved and must be 0. This is a
programming error.
Typical file-system error: 2 (FEInvalOp)
Effect. The send initiation fails with an error.
Recovery. Set the reserved bits in the flags parameter to 0.
910
FEScMissingParameter
Cause. A required parameter is not supplied. This is a programming error.
Typical file-system error: 29 (FEMissParam)
Effect. The send initiation fails with an error.
Recovery. Check the syntax of the procedure call and supply the required parameters.
911
FEScInvalidBufferLength
118 Pathsend Errors