TS/MP 2.5 Pathsend and Server Programming Manual

901: FEScInvalidPathmonName
Cause. The PATHMON process name specified in a call to SERVERCLASS_SEND_ or
SERVERCLASS_DIALOG_BEGIN_ is not syntactically correct. This name must be a valid external
process name. This is a programming error.
Typical file-system error: 2 (FEInvalOp).
Effect. The send initiation fails with an error.
Recovery. Correct the PATHMON name syntax. For more information, see the TS/MP Pathsend
and Server Programming Manual.
902: FEScPathmonConnect
Cause. An error has occurred in the communication of the requestor with the PATHMON process.
For example, an open operation has failed, an I/O error has occurred, or the PATHMON process
has failed.
Typical file-system errors: 12, 14, 40, 48, 201, or one of the path errors between 240 and 255.
Effect. The SERVERCLASS_SEND_ or SERVERCLASS_DIALOG_BEGIN_ call is completed with an
error. The message is not sent to the server process.
Recovery. Recovery depends upon the file-system error:
• Error 12 (FEInUse) indicates that the PATHMON process was unable to open the ACS subsystem
process broker. Specific causes of this situation include (but are not limited to) these:
◦ The maximum number of processes that the PATHMON process can communicate with
is exceeded.
◦ The remote password on the system where the SERVERCLASS_SEND_ request originated
is not set for the system where the server-class was running. The PATHMON process
receives a file-system error 48 but converts this error into a file-system error 12. To recover,
ensure that all remote passwords are properly set, as described in the Expand Network
Management Guide.
• Error 14 (FENoSuchDev) indicates the PATHMON process does not exist. Start the PATHMON
process or use an existing PATHMON process.
• Error 40 (FETimeout) indicates that a timeout error occurred, possibly because a server is in
debug mode. For more information about timeout errors for servers in debug mode, see
Considerations for Debugging Pathway Servers in chapter 4 of the TS/MP Pathsend and
Server Programming Manual.
• Error 48 (FESecViol) indicates there is a security violation. For information about network and
server-class security, see chapter 3, Writing Pathsend Requestors, in the TS/MP Pathsend and
Server Programming Manual.
• Error 201 (FEPathDown) or error 240 through 255 indicates that a path error occurred (for
example, the PATHMON process failed). Restart the PATHMON process.
903: FEScPathmonMessage
Cause. The ACS subsystem process broker received an unrecognizable message from the PATHMON
process while processing a SERVERCLASS_SEND_ or SERVERCLASS_DIALOG_BEGIN_ request.
You might be using incompatible versions of the ACS subsystem and PATHMON processes, or
this could be an ACS subsystem or PATHMON process internal error.
Typical file-system error: 0 (FEOK).
Effect. The SERVERCLASS_SEND_ or SERVERCLASS_DIALOG_BEGIN_ call is completed with an
error. The message is not sent to the server process.
Recovery. This is a nonrecoverable error.
Descriptions of Pathsend Errors 127