TS/MP 2.5 Release Supplement

Req/sec Avg(STD)Max : 0.0(0.0)0.0
nl
Send Avg(STD)Max : 2.3(1.4)4.0
nl
Dialog Duration Avg(STD)Max : 0.0(0.0)0.0
DOMAIN : \A.%PDM2
nl
SERVERCLASS: \A.$PM3.SC2
nl
Static Count : 02
nl
Dynamic Count : 00
nl
Link Time Avg(STD)Max : 0.0(0.0)0.0
nl
Req/sec Avg(STD)Max : 0.0(0.0)0.0
nl
Send Avg(STD)Max : 1.2(0.4)3.0
nl
Dialog Duration Avg(STD)Max : 0.0(0.0)0.0
PROCESSOR : 01
Send MaxSend Avg
(STD)
Requestor
Count
Link MaxLink CountSrvClass
Count
Domain
Count
082.0(3.3)0108050101
DOMAIN : \A.%PDM1
nl
SERVERCLASS: \A.$PM1.SC1
nl
Static Count : 04
nl
Dynamic Count : 01
nl
Link Time Avg(STD)Max : 0.0(0.0)0.0
nl
Req/sec Avg(STD)Max : 0.0(0.0)0.0
nl
Send Avg(STD)Max : 2.0(1.1)3.5
nl
Dialog Duration Avg(STD)Max : 0.0(0.0)0.00
->STATS ACS \A.$ZACS,RESET
->STATS ACS \A.$ZACS
PROCESSOR: 00
Send MaxSend Avg
(STD)
Requestor
Count
Link MaxLink CountSrvClass
Count
Domain
Count
000.0(0.0)0000000000
PROCESSOR: 01
Send MaxSend Avg
(STD)
Requestor
Count
Link MaxLink CountSrvClass
Count
Domain
Count
000.0(0.0)0000000000
NOTE: If a PATHMON is configured under multiple Pathway domains, then the Pathway domain
based statistics for server classes configured under such a PATHMON may be incorrect. ACS will
calculate those statistics considering the sends for all the Pathway domains where that PATHMON
was added.
STATUS Command
Use the STATUS command to display the current operational status of the ACS subsystem. The
information displayed depends on the state of the ACS subsystem, including any modifications
specified by the CONTROL command.
This is a non-sensitive command and has been updated to include the accurate state of the ACSCTL
file.
Syntax Summary
STATUS [/OUT <file-spec>/]<object-spec>[, DETAIL]
80 SCF Command Reference for the ACS Subsystem