TS/MP 2.5 System Management Manual

Example 20 Sample Server Statistics
15:22:3019 FEB 1996, SERVER SERVME
IN TCP TCP1
*
% DYNAMICAVG WAITSMAX WAITS% WAITREQ CNTQUEUE INFO
*
:
99.92.37 799.833272
I/O CNTAVG TSIZEMAX TSIZEREQ CNTI/O INFO
*
:
3330422 33304SEND
22REPLY
RESPONSE TIME INFO (TIME VALUES IN SECS)
*
:
SEND TO SERVERCLASS
STAND DEVMIN RESP MAX RESPAVG RESP # MEAS SUMMARY
0.490.102.51 0.5033303
IN ACS subsystem LM1 INTERVAL 10 MINS COUNT 1/5 25 SEP 1984, 11:50:25
% DYNAMICAVG WAITS MAX WAITS % WAIT REQ CNT QUEUE INFO:
94.70.000 0.0 19
I/O CNTAVG TSIZE MAX TSIZE REQ CNT I/O INFO:
2602155 1409 2602SEND
4551877REPLY
*
Collected only if you have the Pathway/iTS product and TCP STATS ON
Note that neither the ACS subsystem process nor the TCP generate values for the REPLY REQ CNT
and REPLY I/O CNT fields. Note also the inclusion of Response Time Info. These statistics are
collected only the TCP. See “Response Time Info” (page 121).
Queue Info
The QUEUE INFO section in the statistics display provides information about the server-class wait
queue.
This queue is for SEND operations that the link manager such as ACS subsystem processes, or
TCP, cannot run immediately because a link to the server class is not available. Server class requests
wait in the link manager until an existing link becomes available or until the PATHMON process
grants a new link.
Example 21 (page 119) shows only the QUEUE INFO section of the sample server statistics. See
this figure as you read this section.
118 Tuning Your System by Using Statistics