TS/MP 2.5 System Management Manual

Example
• If the following commands are entered at the PATHCOM prompt:
\NSSYS.$VOL.SUBVOL 11> PATHCOM
$X30Q: PATHCOM - T0845H02 - (30APR09)
(C)2008-2009 Hewlett Packard Development Company, L.P.
= [ SERVER SRV1 is configured in $PM1
= OPEN $PM1
= ALTER SRV1, NUMSTATIC 1
= ALTER SRV1, DEBUG ON
• To execute the second command, enter:
= !2
• The second command is executed as:
= ALTER SRV1, NUMSTATIC 1
• To execute a command starting with “op”, enter:
= !op
The following command is executed:
= OPEN $PM1
! Command 149