TS/MP 2.5 System Management Manual

MAXSPI N
MAXSTARTUPS N
[CURRENTLY M]
[CURRENTLY M]
MAXTCPS N
MAXTELLQUEUE N [CURRENTLY M]
[CURRENTLY M] MAXTELLS N
MAXTERMS N
MAXTMFRESTARTS N
OWNER \OCOOL.G,U
SECURITY “N”
SPREBALANCEMODE “AUTO”
OUT list-file
directs output to the named list file; this file can be a DEFINE name. If this option is omitted, the
PATHMON process directs the output to the PATHCOM list file; this is typically the home terminal.
OBEYFORM
causes the information to appear in the format you would use to set up a PATHMON configuration
file. Each attribute is displayed as a syntactically correct PATHCOM command with the proper SET
prefix.
Consideration
OBEYFORM is an INFO command option for the PATHMON process, PATHWAY, and SERVER
objects, as well as for the Pathway/iTS TCP, TERM, and PROGRAM objects. By using the OUT
list-file option and issuing an INFO command for each object in succession, you can build
a new cold start command file that reflects any modifications you have made to your Pathway
configuration. You must add the START PATHWAY command at the end of the OUT file before
using the file to start a Pathway environment.
Examples
After you define the attribute values with the SET PATHWAY command, you can use the INFO
PATHWAY command to display those values. This example shows the output from an INFO PATHWAY
command after the attribute values are defined:
[CURRENTLY 759]PATHWAY MAXASSIGNS 1200
[CURRENTLY 5] MAXDEFINES 50
[CURRENTLY 0] MAXLINKMONS 16
[CURRENTLY 2] MAXPARAMS 30
[CURRENTLY 1] MAXPATHCOMS 10
[CURRENTLY 320] MAXSERVERCLASSES 350
[CURRENTLY 1544] MAXSERVERPROCESSES 1750
[CURRENTLY 0]
[CURRENTLY 0]
MAXSPI 5
MAXSTARTUPS 400
NODEINDEPENDENT ON
OWNER \*.255,63
SECURITY "U"
NOTE: The configuration in this example does not include requestor objects that run under
Pathway/iTS, if configured, the INFO PATHWAY command these objects.
This example shows the output from an INFO PATHWAY, OBEYFORM command before the attribute
values are defined:
SET PATHWAY DUMASK 007
SET PATHWAY MAXASSIGNS ?
SET PATHWAY MAXDEFINES 0
SET PATHWAY MAXLINKMONS 0
SET PATHWAY MAXPARAMS ?
INFO PATHWAY Command 155