TS/MP 2.5 System Management Manual

MAXSTARTUPS number
is the maximum number of server classes that can have STARTUP messages.
number must be a value from 0 through 4095. To the PATHMON process to process an ALTER
SERVER STARTUP command, specify a maximum of 4094 for this attribute.
This attribute is required. It has no default.
Because only one SET SERVER STARTUP definition for each server class counts toward this limit, the
number for this attribute must not exceed the value for MAXSERVERCLASSES.
MAXTCPS number
This attribute is specific to the Pathway/iTS product. A complete description of this attribute is given
in the Pathway/iTS System Management Manual.
If your environment does not support Pathway/iTS, HP recommends that you specify 0 for the value.
This attribute is mandatory. It has no default value.
MAXTERMS number
This attribute is specific to the Pathway/iTS product. A complete description of this attribute is given
in the Pathway/iTS System Management Manual.
This attribute is mandatory. It has no default. If your environment does not support Pathway/iTS, HP
recommends that you specify 0 for the value.
MAXDEFINES number
is the maximum number of DEFINE definitions that you can specify for all server classes in a Pathway
environment. Each SET SERVER DEFINE attribute counts as one toward the value of this attribute.
number must be a value from 0 to 8191.
This attribute is mandatory. It has no default value.
MAXEXTERNALTCPS number
This attribute is specific to the Pathway/iTS product. A complete description of this attribute is given
in the Pathway/iTS System Management Manual.
If your environment does not support Pathway/iTS, HP recommends that you specify 0 for the value.
The default value is 0.
MAXLINKMONS number
is the maximum number of ACS subsystem processes that can communicate with the PATHMON process at the same
time. ACS subsystem processes manage communication between Pathway server classes and all Pathsend requestors
executing within the processor of the ACS subsystem processes.
The total of the values for MAXTCPS, MAXEXTERNALTCPS, and MAXLINKMONS cannot exceed 800. A maximum of
255 TCPs, external TCPs, and ACS subsystem processes are allowed to concurrently hold links to a single server
process. For other limits, see “Configuration Limits and Defaults” (page 318).
This attribute is required. It has no default. If the value for MAXLINKMONS is 0, any attempt by a ACS subsystem
process to access a server controlled by the PATHMON process fails.
MAXPATHCOMS number
is the maximum number of PATHCOM processes that can run simultaneously within Pathway.
number must be a value from 1 through 100. The default value is 5. For other limits, see
“Configuration Limits and Defaults” (page 318).
Until a Pathway environment is started, only one PATHCOM or Subsystem Programmatic Interface
(SPI) process at a time can open communication with the PATHMON process.
MAXPROGRAMS number
This attribute is specific to the Pathway/iTS product. A complete description of this attribute is given
in the Pathway/iTS System Management Manual.
If your environment does not support Pathway/iTS, HP recommends that you specify 0 for the value.
The default value is 0.
MAXSPI number
SET PATHWAY Command 161