TS/MP 2.5 System Management Manual

The security attributes are the same as the Guardian security attributes. The possible values are:
Any local user“A”
A group member or owner“G”
Owner only“O”
Local super ID“-”
Any local or remote user“N”
Any member of owner's community (local or remote user having same group ID as owner)“C”
Any member of owner's user class (local or remote user having same group ID and user
ID as owner)
“U”
Quotation marks are required. The default value is “O”.
CAUTION: The owner of this system is the super ID. Allowing the security to default to “N” results in a security risk
for your system.
SPREBALANCEMODE rbmodeval
specifies the mode in which PATHMON exhibits the enhanced rebalancing of server process after
processor reload. The valid values for this attribute are DISABLE, AUTO, and MANUAL. For more
information about difference modes of SPREBALANCEMODE, see HP NonStop TS/MP 2.5 Release
Supplement Manual.
Consideration
All Pathway object attributes can be changed before a cold start.
Example
These SET PATHWAY commands define a sample PATHMON environment:
SET PATHWAY DUMASK 007
SET PATHWAY MAXASSIGNS 15
SET PATHWAY MAXDEFINES 20
SET PATHWAY MAXLINKMONS 16
SET PATHWAY MAXPARAMS 5
SET PATHWAY MAXPATHCOMS 2
SET PATHWAY MAXSERVERCLASSES 5
SET PATHWAY MAXSERVERPROCESSES 25
SET PATHWAY MAXSPI 5
SET PATHWAY MAXSTARTUPS 5
SET PATHWAY MAXTMFRESTARTS 5
SET PATHWAY NODEINDEPENDENT ON
SET PATHWAY OWNER \*.8,8
SET PATHWAY SECURITY "U"
SET PATHWAY SPREBALANCEMODE “AUTO”
NOTE: The configuration in this example does not include requestor objects that run under
Pathway/iTS.
SHUTDOWN Command (Old)
The SHUTDOWN command stops the PATHMON-controlled objects.
NOTE: The SHUTDOWN2 command replaces the SHUTDOWN command. HP recommends that you
use the SHUTDOWN2 command for a faster, more reliable means of stopping your Pathway
environment. The SHUTDOWN command is still available to maintain backward compatibility.
164 PATHMON Environment Control Commands