TS/MP 2.5 System Management Manual

Example 25 STATUS LINKMON Display Format

CPUPROCESSINFOERRORSTATELINKMON

cpuprocess-nameinfopw-errorstatelm-name

The fields in this display are as follows:

DescriptionDisplay Field

Full name of the LINKMON process, including the node nameLINKMON

Current state of the LINKMON process. The only possible value is:STATE

The LINKMON process is running and communicating with the PATHMON processRUNNING

Pathway error numberERROR

Additional information regarding the error number. See the error messages listed in “PATHMON

Messages (Numbers 1000-1499)” (page 212) through “LINKMON Log Messages” (page 272).

INFO

Process name of the LINKMON processPROCESS

processor number in which the LINKMON process is currently runningCPU

Examples

This command displays status information for all LINKMON processes communicating with the

PATHMON process:

STATUS LINKMON *

These commands display status information for a specific LINKMON process running on a specific

node:

STATUS LINKMON L\NWREG.$ZL05

STATUS L\NWREG.$ZL05

This command directs status information to a specified output file:

STATUS/OUT STATFLE/LINKMON L\CPTNO.$ZL05

STATUS PATHMON Command

Use the STATUS PATHMON command to display the status of the PATHMON process, the

PATHMON configuration file, and the logging files. This command also displays a list of the

processes currently communicating with the PATHMON process.

STATUS [ / OUT list-file / ] PATHMON

OUT list-file

directs output to the file that you specify; this can be a DEFINE name. If you omit this option, the

PATHMON process writes the output to the PATHCOM list file; this is typically the home terminal.

Display Format

The format of the display returned by the STATUS PATHMON command is shown in Example 26

(page 171). The fields are described in the following section:

170 PATHMON Environment Control Commands