TS/MP 2.5 System Management Manual

1027
*1027* PATHMON, LOG1 FILE CLOSED
Cause. The LOG1 file is closed.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1028
*1028* PATHMON, LOG1 FILE OPENED
Cause. The LOG1 file is open.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1029
*1029* PATHMON, LOG2 FILE CLOSED
Cause. The LOG2 file is closed.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1030
*1030* PATHMON, LOG2 FILE OPENED
Cause. The LOG2 file is open.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1031
*1031* REQUIRED PATHWAY OR PATHMON CONFIGURATION PARAMETER
NOT SET
Cause. A required PATHMON or PATHWAY object attribute is not defined.
Effect. The operation fails.
Recovery. Define the required attribute. For details about the required attributes for those commands,
see the SET PATHMON and the SET PATHWAY commands.
1032
*1032* PATHCTL FILE IS FULL
Cause. An entry cannot be added because the PATHMON configuration file is full. This is an
internal error.
PATHMON Messages 219