TS/MP 2.5 System Management Manual

1058
*1058* FREEZE IN PROGRESS
Cause. A freeze request for the server is already in progress.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1059
*1059* FREEZE PENDING
Cause. A freeze request is accepted and will complete when all link managers pass a message to
the PATHMON process that the server class is frozen.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1060
*1060* NOT FROZEN
Cause. An attempt was made to thaw a server that was not frozen or was already thawed.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1061
*1061* SERVER server-name, SERVER CLASS FROZEN
Cause. A TCP or ACS subsystem process link request was rejected because the specified server
class is frozen. The server class must be thawed before links can be granted.
Effect. You cannot perform a SEND operation to a server class that is frozen.
Recovery. Thaw the server class, and then reissue the SEND request.
1062
*1062* MUST BE FROZEN
Cause. A STOP SERVER command was issued before the server class was frozen.
Effect. The command fails.
Recovery. Reissue the command after the server class is frozen.
1063
*1063* MUST BE THAWED
Cause. A START SERVER command was issued before the server class was thawed.
Effect. The command fails.
PATHMON Messages 225