TS/MP 2.5 System Management Manual

Recovery. Reissue the command after the server class is thawed.
1064
*1064* SERVER server-name, FROZEN
Cause. The specified server class is frozen.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1065
*1065* SERVER server-name, THAWED
Cause. The specified server class is thawed.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1066
*1066* TERMINALS NOT CONFIGURED TO RECEIVE TELL MESSAGES
Cause. You issued a TELL command but the SET PATHWAY MAXTELLQUEUE attribute value is
set to 0.
Effect. The tell message request fails.
Recovery. Enter a value between 1 and 300 for the MAXTELLQUEUE attribute.
1067
*1067* INVALID INTERNAL IDENTIFIER FROM TCP
(%internal-identifier)
Cause. A TCP or ACS subsystem process request specified an entity that is not known to the
PATHMON process. This is an internal error.
Effect. The request fails.
Recovery. Contact your HP representative and provide all relevant information as follows:
• Descriptions of the problem and accompanying symptoms
• Details from the messages generated
• Your PATHMON configuration file and the PATHMON process version
• A description of the application task that was in progress when the error was encountered
• Supporting documentation such as Event Management Service (EMS) logs, trace files, and
dump files, if applicable
If your local operating procedures require contacting the Global Customer Support Center (GCSC),
supply your system number and the numbers and versions of all related products as well.
1068
*1068* PATHMON, MEMORY DUMP TAKEN file-name
226 PATHMON Messages (Numbers 1000-1499)